BotServ Commands

BotServ allows you to have a bot on your own channel.

It has been created for users that can’t host or configure a bot, or for use on networks that don’t allow users’ bot.

Available commands are listed below,  to use them, type /msg BotServ command.

For more information on a specific command, type /msg BotServ HELP command.

  • BOTLIST
     Syntax: /msg BotServ  BOTLIST
    
     Lists all available bots on this network.
  • ASSIGN
     Syntax: /msg BotServ  ASSIGN chan nick
    
     Assigns a bot pointed out by nick to the channel chan. You
     can then configure the bot for the channel so it fits
     your needs.
  • UNASSIGN
     Syntax: /msg BotServ  UNASSIGN chan
    
     Unassigns a bot from a channel. When you use this command,
     the bot won't join the channel anymore. However, bot
     configuration for the channel is kept, so you will always
     be able to reassign a bot later without have to reconfigure
     it entirely.
  • INFO
     Syntax: /msg BotServ  INFO {chan | nick}
    
     Allows you to see BotServ information about a channel or a bot.
     If the parameter is a channel, then you'll get information
     such as enabled kickers. If the parameter is a nick,
     you'll get information about a bot, such as creation
     time or number of channels it is on.
  • SET
     Syntax: /msg BotServ  SET (channel | bot) option parameters
    
     Configures bot options.  option can be one of:
    
         DONTKICKOPS      To protect ops against bot kicks
         DONTKICKVOICES   To protect voices against bot kicks
         GREET            Enable greet messages
         FANTASY          Enable fantaisist commands
         SYMBIOSIS        Allow the bot to act as a real bot
    
     Type /msg BotServ HELP SET option for more information
     on a specific option.
    
     Note: access to this command is controlled by the
     level SET.
    • SET DONTKICKOPS
       Syntax: /msg BotServ  SET channel DONTKICKOPS {ON|OFF}
      
       Enables or disables ops protection mode on a channel.
       When it is enabled, ops won't be kicked by the bot
       even if they don't match the NOKICK level.
    • SET DONTKICKVOICES
       Syntax: /msg BotServ  SET channel DONTKICKVOICES {ON|OFF}
      
       Enables or disables voices protection mode on a channel.
       When it is enabled, voices won't be kicked by the bot
       even if they don't match the NOKICK level.
    • SET FANTASY
       Syntax: /msg BotServ  SET channel FANTASY {ON|OFF}
      
       Enables or disables fantasy mode on a channel.
       When it is enabled, users will be able to use
       commands !op, !deop, !voice, !devoice,
       !kick, !kb, !unban, !seen on a channel (find how
       to use them; try with or without nick for each,
       and with a reason for some).
      
       Note that users wanting to use fantaisist
       commands MUST have enough level for both
       the FANTASIA and another level depending
       of the command if required (for example, to use
       !op, user must have enough access for the OPDEOP
       level).
    • SET GREET
       Syntax: /msg BotServ  SET channel GREET {ON|OFF}
      
       Enables or disables greet mode on a channel.
       When it is enabled, the bot will display greet
       messages of users joining the channel, provided
       they have enough access to the channel.
    • SET SYMBIOSIS
       Syntax: /msg BotServ  SET channel SYMBIOSIS {ON|OFF}
      
       Enables or disables symbiosis mode on a channel.
       When it is enabled, the bot will do everything
       normally done by BotServ on channels, such as MODEs,
       KICKs, and even the entry message.
  • KICK
     Syntax: /msg BotServ  KICK channel option parameters
    
     Configures bot kickers.  option can be one of:
    
         BOLDS         Sets if the bot kicks bolds
         BADWORDS      Sets if the bot kicks bad words
         CAPS          Sets if the bot kicks caps
         COLORS        Sets if the bot kicks colors
         FLOOD         Sets if the bot kicks flooding users
         REPEAT        Sets if the bot kicks users who repeat
                            themselves
         REVERSES      Sets if the bot kicks reverses
         UNDERLINES    Sets if the bot kicks underlines
    
     Type /msg BotServ HELP KICK option for more information
     on a specific option.
    
     Note: access to this command is controlled by the
     level SET.
    • KICK BOLDS
       Syntax: /msg BotServ  KICK channel BOLDS {ON|OFF} [ttb]
      
       Sets the bolds kicker on or off. When enabled, this
       option tells the bot to kick users who use bolds.
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
    • KICK COLORS
       Syntax: /msg BotServ  KICK channel COLORS {ON|OFF} [ttb]
      
       Sets the colors kicker on or off. When enabled, this
       option tells the bot to kick users who use colors.
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
    • KICK REVERSES
       Syntax: /msg BotServ  KICK channel REVERSES {ON|OFF} [ttb]
      
       Sets the reverses kicker on or off. When enabled, this
       option tells the bot to kick users who use reverses.
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
    • KICK UNDERLINES
       Syntax: /msg BotServ  KICK channel UNDERLINES {ON|OFF} [ttb]
      
       Sets the underlines kicker on or off. When enabled, this
       option tells the bot to kick users who use underlines.
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
    • KICK CAPS
       Syntax: /msg BotServ  KICK channel CAPS {ON|OFF} [ttb [min [percent]]]
      
       Sets the caps kicker on or off. When enabled, this
       option tells the bot to kick users who are talking in
       CAPS.
      
       The bot kicks only if there are at least min caps
       and they constitute at least percent% of the total
       text line (if not given, it defaults to 10 characters
       and 25%).
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
    • KICK FLOOD
       Syntax: /msg BotServ  KICK channel FLOOD {ON|OFF} [ttb [ln [secs]]]
      
       Sets the flood kicker on or off. When enabled, this
       option tells the bot to kick users who are flooding
       the channel using at least ln lines in secs seconds
       (if not given, it defaults to 6 lines in 10 seconds).
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
    • KICK REPEAT
       Syntax: /msg BotServ  KICK channel REPEAT {ON|OFF} [ttb [num]]
      
       Sets the repeat kicker on or off. When enabled, this
       option tells the bot to kick users who are repeating
       themselves num times (if num is not given, it
       defaults to 3).
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
    • KICK BADWORDS
       Syntax: /msg BotServ  KICK channel BADWORDS {ON|OFF} [ttb]
      
       Sets the bad words kicker on or off. When enabled, this
       option tells the bot to kick users who say certain words
       on the channels.
      
       You can define bad words for your channel using the
       BADWORDS command. Type /msg BotServ HELP BADWORDS for
       more information.
      
       ttb is the number of times an user can be kicked
       before it get banned. Don't give ttb to disable
       the ban system once activated.
  • BADWORDS
     Syntax: /msg BotServ  BADWORDS channel ADD word [SINGLE | START | END]
             BADWORDS channel DEL {word | entry-num | list}
             BADWORDS channel LIST [mask | list]
             BADWORDS channel CLEAR
    
     Maintains the bad words list for a channel. The bad
     words list determines which words are to be kicked
     when the bad words kicker is enabled. For more information,
     type /msg BotServ HELP KICK BADWORDS.
    
     The BADWORDS ADD command adds the given word to the
     badword list. If SINGLE is specified, a kick will be
     done only if an user says the entire word. If START is
     specified, a kick will be done if an user says a word
     that starts with word. If END is specified, a kick
     will be done if an user says a word that ends with
     word. If you don't specify anything, a kick will
     be issued every time word is said by an user.
    
     The BADWORDS DEL command removes the given word from the
     bad words list.  If a list of entry numbers is given, those
     entries are deleted.  (See the example for LIST below.)
    
     The BADWORDS LIST command displays the bad words list.  If
     a wildcard mask is given, only those entries matching the
     mask are displayed.  If a list of entry numbers is given,
     only those entries are shown; for example:
    
        BADWORDS channel LIST 2-5,7-9
           Lists bad words entries numbered 2 through 5 and
           7 through 9.
    
     The BADWORDS CLEAR command clears all entries of the
     bad words list.
  • SAY
     Syntax: /msg BotServ  SAY channel text
    
     Makes the bot say the given text on the given channel.
  • ACT
     Syntax: /msg BotServ  ACT channel text
    
     Makes the bot do the equivalent of a "/me" command
     on the given channel using the given text.
  • Go to Top