ChanServ Commands


ChanServ
allows you to register and control various aspects of channels.

ChanServ can often prevent malicious users from “taking over” channels by limiting who is allowed channel operator privileges.

Available commands are listed below, to use them, type /msg ChanServ command.

For more information on a specific command, type /msg ChanServ HELP command.

  • REGISTER

    Syntax: /msg ChanServ REGISTER channel password description

    Registers a channel in the ChanServ database. In order
    to use this command, you must first be a channel operator
    on the channel you’re trying to register. The password
    is used with the IDENTIFY command to allow others to
    make changes to the channel settings at a later time.
    The last parameter, which must be included, is a
    general description of the channel’s purpose.

    When you register a channel, you are recorded as the
    “founder” of the channel. The channel founder is allowed
    to change all of the channel settings for the channel;
    ChanServ will also automatically give the founder
    channel-operator privileges when s/he enters the channel.
    See the ACCESS command (/msg ChanServ HELP ACCESS) for
    information on giving a subset of these privileges to
    other channel users.

    NOTICE: In order to register a channel, you must have
    first registered your nickname. If you haven’t,
    /msg ChanServ HELP for information on how to do so.

  • IDENTIFY

    Syntax: /msg ChanServ IDENTIFY channel password

    Authenticates you to ChanServ as the founder of the given
    channel. Many commands require you to use this command
    before using them. The password should be the same one
    you sent with the REGISTER command.

  • LOGOUT

    Syntax: /msg ChanServ LOGOUT channel nickname

    This command will log the selected nickname out meaning they
    would have to reidentify themselves to regain their access.

    If you are the founder of the channel, you can log out anybody,
    else you can only log out yourself.

  • DROP

    Syntax: /msg ChanServ DROP channel

    Unregisters the named channel. Can only be used by
    channel founder, who must use the IDENTIFY command first.

  • SET

    Syntax: /msg ChanServ SET channel option parameters

    Allows the channel founder to set various channel options
    and other information.

    Available options:

    FOUNDER Set the founder of a channel
    SUCCESSOR Set the successor for a channel
    PASSWORD Set the founder password
    DESC Set the channel description
    URL Associate a URL with the channel
    EMAIL Associate an E-mail address with the channel
    ENTRYMSG Set a message to be sent to users when they
    enter the channel
    BANTYPE Set how Services make bans on the channel
    MLOCK Lock channel modes on or off
    KEEPTOPIC Retain topic when channel is not in use
    OPNOTICE Send a notice when OP/DEOP commands are used
    PEACE Regulate the use of critical commands
    PRIVATE Hide channel from LIST command
    RESTRICTED Restrict access to the channel
    SECURE Activate ChanServ security features
    SECUREOPS Stricter control of chanop status
    SECUREFOUNDER Stricter control of channel founder status
    SIGNKICK Sign kicks that are done with KICK command
    TOPICLOCK Topic can only be changed with TOPIC
    XOP Toggle the user privilege system

    Type /msg ChanServ HELP SET option for more information on a
    particular option.

    • SET FOUNDER

      Syntax: /msg ChanServ SET channel FOUNDER nick

      Changes the founder of a channel. The new nickname must
      be a registered one.

    • SET SUCCESSOR

      Syntax: /msg ChanServ SET channel SUCCESSOR nick

      Changes the successor of a channel. If the founder’s
      nickname expires or is dropped while the channel is still
      registered, the successor will become the new founder of the
      channel. However, if the successor already has too many
      channels registered (<num>), the channel will be dropped
      instead, just as if no successor had been set. The new
      nickname must be a registered one.

    • SET PASSWORD

      Syntax: /msg ChanServ SET channel PASSWORD password

      Sets the password used to identify as the founder of the
      channel.

    • SET DESC

      Syntax: /msg ChanServ SET channel DESC description

      Sets the description for the channel, which shows up with
      the LIST and INFO commands.

    • SET URL

      Syntax: /msg ChanServ SET channel URL [url]

      Associates the given URL with the channel. This URL will
      be displayed whenever someone requests information on the
      channel with the INFO command. If no parameter is given,
      deletes any current URL for the channel.

    • SET EMAIL

      Syntax: /msg ChanServ SET channel EMAIL [address]

      Associates the given E-mail address with the channel.
      This address will be displayed whenever someone requests
      information on the channel with the INFO command. If no
      parameter is given, deletes any current E-mail address for
      the channel.

    • SET ENTRYMSG

      Syntax: /msg ChanServ SET channel ENTRYMSG [message]

      Sets the message which will be sent via /notice to users
      when they enter the channel. If no parameter is given,
      causes no message to be sent upon entering the channel.

    • SET BANTYPE

      Syntax: /msg ChanServ SET channel BANTYPE bantype

      Sets the ban type that will be used by services whenever
      they need to ban someone from your channel.

      bantype is a number between 0 and 3 that means:

      0: ban in the form *!user@host
      1: ban in the form *!*user@host
      2: ban in the form *!*@host
      3: ban in the form *!*user@*.domain

    • SET KEEPTOPIC

      Syntax: /msg ChanServ SET channel KEEPTOPIC {ON | OFF}

      Enables or disables the topic retention option for a
      channel. When topic retention is set, the topic for the
      channel will be remembered by ChanServ even after the
      last user leaves the channel, and will be restored the
      next time the channel is created.

    • SET TOPICLOCK

      Syntax: /msg ChanServ SET channel TOPICLOCK {ON | OFF}

      Enables or disables the topic lock option for a channel.
      When topic lock is set, ChanServ will not allow the
      channel topic to be changed except via the TOPIC
      command.

    • SET MLOCK

      Syntax: /msg ChanServ SET channel MLOCK modes

      Sets the mode-lock parameter for the channel. ChanServ
      allows you to define certain channel modes to be always
      on, off or free to be either on or off.

      The modes parameter is constructed exactly the same way
      as a /MODE command; that is, modes followed by a + are
      locked on, and modes followed by a – are locked off. Note,
      however, that unlike the /MODE command, each use of
      SET MLOCK will remove all modes previously locked before
      setting the new!

      Warning: If you set a mode-locked key, as in the second
      example below, you should also set the RESTRICTED option for
      the channel (see HELP SET RESTRICTED), or anyone entering
      the channel when it is empty will be able to see the key!

      Examples:

      SET #channel MLOCK +nt-iklps
      Forces modes n and t on, and modes i, k, l, p, and
      s off. Mode m is left free to be either on or off.

      SET #channel MLOCK +knst-ilmp my-key
      Forces modes k, n, s, and t on, and modes i, l, m,
      and p off. Also forces the channel key to be
      “my-key”.

      SET #channel MLOCK +
      Removes the mode lock; all channel modes are free
      to be either on or off.

    • SET PEACE

      Syntax: /msg ChanServ SET channel PEACE {ON | OFF}

      Enables or disables the peace option for a channel.
      When peace is set, an user won’t be able to kick,
      ban or remove a channel status of an user that has
      a level superior or equal to his via ChanServ commands.

    • SET PRIVATE

      Syntax: /msg ChanServ SET channel PRIVATE {ON | OFF}

      Enables or disables the private option for a channel.
      When private is set, a /msg ChanServ LIST will not
      include the channel in any lists.

    • SET RESTRICTED

      Syntax: /msg ChanServ SET channel RESTRICTED {ON | OFF}

      Enables or disables the restricted access option for a
      channel. When restricted access is set, users not on
      the access list will instead be kicked and banned from the channel.

    • SET SECURE

      Syntax: /msg ChanServ SET channel SECURE {ON | OFF}

      Enables or disables ChanServ’s security features for a
      channel. When SECURE is set, only users who have
      registered their nicknames with ChanServ and IDENTIFY’d
      with their password will be given access to the channel
      as controlled by the access list.

    • SET SECUREOPS

      Syntax: /msg ChanServ SET channel SECUREOPS {ON | OFF}

      Enables or disables the secure ops option for a channel.
      When secure ops is set, users who are not on the userlist
      will not be allowed chanop status.

    • SET SECUREFOUNDER

      Syntax: /msg ChanServ SET channel SECUREFOUNDER {ON | OFF}

      Enables or disables the secure founder option for a channel.
      When secure founder is set, only the real founder will be
      able to drop the channel, change its password, its founder and its
      successor, and not those who are IDENTIFY’d with ChanServ.

    • SET SIGNKICK

      Syntax: /msg ChanServ SET channel SIGNKICK {ON | LEVEL | OFF}

      Enables or disables signed kicks for a
      channel. When SIGNKICK is set, kicks issued with
      ChanServ KICK command will have the nick that used the
      command in their reason.

      If you use LEVEL, those who have a level that is superior
      or equal to the SIGNKICK level on the channel won’t have their
      kicks signed. See /msg ChanServ HELP LEVELS for more information.

    • SET XOP

      Syntax: /msg ChanServ SET channel XOP {ON | OFF}

      Enables or disables the xOP lists system for a channel.
      When XOP is set, you have to use the AOP/SOP/VOP
      commands in order to give channel privileges to
      users, else you have to use the ACCESS command.

      Technical Note: when you switch from access list to xOP
      lists system, your level definitions and user levels will be
      changed, so you won’t find the same values if you
      switch back to access system!

      You should also check that your users are in the good xOP
      list after the switch from access to xOP lists, because the
      guess is not always perfect… in fact, it is not recommended
      to use the xOP lists if you changed level definitions with
      the LEVELS command.

      Switching from xOP lists system to access list system
      causes no problem though.

    • SET OPNOTICE

      Syntax: /msg ChanServ SET channel OPNOTICE {ON | OFF}

      Enables or disables the op-notice option for a channel.
      When op-notice is set, ChanServ will send a notice to the
      channel whenever the OP or DEOP commands are used for a user
      in the channel.

  • AOP

    Syntax: /msg ChanServ AOP channel ADD nick
    AOP channel DEL {nick | entry-num | list}
    AOP channel LIST [mask | list]
    AOP channel CLEAR

    Maintains the AOP (AutoOP) list for a channel. The AOP
    list gives users the right to be auto-opped on your channel,
    to unban or invite themselves if needed, to have their
    greet message showed on join, and so on.

    The AOP ADD command adds the given nickname to the
    AOP list.

    The AOP DEL command removes the given nick from the
    AOP list. If a list of entry numbers is given, those
    entries are deleted. (See the example for LIST below.)

    The AOP LIST command displays the AOP list. If
    a wildcard mask is given, only those entries matching the
    mask are displayed. If a list of entry numbers is given,
    only those entries are shown; for example:

    AOP #channel LIST 2-5,7-9
    Lists AOP entries numbered 2 through 5 and
    7 through 9.

    The AOP CLEAR command clears all entries of the
    AOP list.

    The AOP ADD and AOP DEL commands are limited to
    SOPs or above, while the AOP CLEAR command can only
    be used by the channel founder. However, any user on the
    AOP list may use the AOP LIST command.

    This command may have been disabled for your channel, and
    in that case you need to use the access list. See
    /msg ChanServ HELP ACCESS for information about the access list,
    and /msg ChanServ HELP SET XOP to know how to toggle between
    the access list and xOP list systems.

  • HOP

    Syntax: /msg ChanServ HOP channel ADD nick
    HOP channel DEL {nick | entry-num | list}
    HOP channel LIST [mask | list]
    HOP channel CLEAR

    Maintains the HOP (HalfOP) list for a channel. The HOP
    list gives users the right to be auto-halfopped on your
    channel.

    The HOP ADD command adds the given nickname to the
    HOP list.

    The HOP DEL command removes the given nick from the
    HOP list. If a list of entry numbers is given, those
    entries are deleted. (See the example for LIST below.)

    The HOP LIST command displays the HOP list. If
    a wildcard mask is given, only those entries matching the
    mask are displayed. If a list of entry numbers is given,
    only those entries are shown; for example:

    HOP #channel LIST 2-5,7-9
    Lists HOP entries numbered 2 through 5 and
    7 through 9.

    The HOP CLEAR command clears all entries of the
    HOP list.

    The HOP ADD, HOP DEL and HOP LIST commands are
    limited to AOPs or above, while the HOP CLEAR command
    can only be used by the channel founder.

    This command may have been disabled for your channel, and
    in that case you need to use the access list. See
    /msg ChanServ HELP ACCESS for information about the access list,
    and /msg ChanServ HELP SET XOP to know how to toggle between
    the access list and xOP list systems.

  • SOP

    Syntax: /msg ChanServ SOP channel ADD nick
    SOP channel DEL {nick | entry-num | list}
    SOP channel LIST [mask | list]
    SOP channel CLEAR

    Maintains the SOP (SuperOP) list for a channel. The SOP
    list gives users all rights given by the AOP list, and adds
    those needed to use the AutoKick and the BadWords lists,
    to send and read channel memos, and so on.

    The SOP ADD command adds the given nickname to the
    SOP list.

    The SOP DEL command removes the given nick from the
    SOP list. If a list of entry numbers is given, those
    entries are deleted. (See the example for LIST below.)

    The SOP LIST command displays the SOP list. If
    a wildcard mask is given, only those entries matching the
    mask are displayed. If a list of entry numbers is given,
    only those entries are shown; for example:

    SOP #channel LIST 2-5,7-9
    Lists AOP entries numbered 2 through 5 and
    7 through 9.

    The SOP CLEAR command clears all entries of the
    SOP list.

    The SOP ADD, SOP DEL and SOP CLEAR commands are
    limited to the channel founder. However, any user on the
    AOP list may use the SOP LIST command.

    This command may have been disabled for your channel, and
    in that case you need to use the access list. See
    /msg ChanServ HELP ACCESS for information about the access list,
    and /msg ChanServ HELP SET XOP to know how to toggle between
    the access list and xOP list systems.

  • VOP

    Syntax: /msg ChanServ VOP channel ADD nick
    VOP channel DEL {nick | entry-num | list}
    VOP channel LIST [mask | list]
    VOP channel CLEAR

    Maintains the VOP (VOicePeople) list for a channel.
    The VOP list allows users to be auto-voiced and to voice
    themselves if they aren’t.

    The VOP ADD command adds the given nickname to the
    VOP list.

    The VOP DEL command removes the given nick from the
    VOP list. If a list of entry numbers is given, those
    entries are deleted. (See the example for LIST below.)

    The VOP LIST command displays the VOP list. If
    a wildcard mask is given, only those entries matching the
    mask are displayed. If a list of entry numbers is given,
    only those entries are shown; for example:

    VOP #channel LIST 2-5,7-9
    Lists VOP entries numbered 2 through 5 and
    7 through 9.

    The VOP CLEAR command clears all entries of the
    VOP list.

    The VOP ADD, VOP DEL and VOP LIST commands are
    limited to AOPs or above, while the VOP CLEAR command
    can only be used by the channel founder.

    This command may have been disabled for your channel, and
    in that case you need to use the access list. See
    /msg ChanServ HELP ACCESS for information about the access list,
    and /msg ChanServ HELP SET XOP to know how to toggle between
    the access list and xOP list systems.

  • ACCESS

    Syntax: /msg ChanServ ACCESS channel ADD nick level
    ACCESS channel DEL {nick | entry-num | list}
    ACCESS channel LIST [mask | list]
    ACCESS channel CLEAR

    Maintains the access list for a channel. The access
    list specifies which users are allowed chanop status or
    access to ChanServ commands on the channel. Different
    user levels allow for access to different subsets of
    privileges; /msg ChanServ HELP ACCESS LEVELS for more
    specific information. Any nick not on the access list has
    a user level of 0.

    The ACCESS ADD command adds the given nickname to the
    access list with the given user level; if the nick is
    already present on the list, its access level is changed to
    the level specified in the command. The level specified
    must be less than that of the user giving the command, and
    if the nick is already on the access list, the current
    access level of that nick must be less than the access level
    of the user giving the command.

    The ACCESS DEL command removes the given nick from the
    access list. If a list of entry numbers is given, those
    entries are deleted. (See the example for LIST below.)

    The ACCESS LIST command displays the access list. If
    a wildcard mask is given, only those entries matching the
    mask are displayed. If a list of entry numbers is given,
    only those entries are shown; for example:

    ACCESS #channel LIST 2-5,7-9
    Lists access entries numbered 2 through 5 and
    7 through 9.

    The ACCESS CLEAR command clears all entries of the
    access list.

  • ACCESS LEVELS

    User access levels

    By default, the following access levels are defined:

    Founder Full access to ChanServ functions; automatic
    opping upon entering channel. Note
    that only one person may have founder
    status (it cannot be given using the
    ACCESS command).
    10 Access to AKICK command; automatic opping.
    5 Automatic opping.
    3 Automatic voicing.
    0 No special privileges; can be opped by other
    ops (unless secure-ops is set).
    <0 May not be opped.

    These levels may be changed, or new ones added, using the
    LEVELS command; type /msg ChanServ HELP LEVELS for
    information.

  • AKICK

    Syntax: /msg ChanServ AKICK channel ADD {nick | mask} [reason]
    AKICK channel STICK mask
    AKICK channel UNSTICK mask
    AKICK channel DEL {nick | mask | entry-num | list}
    AKICK channel LIST [mask | entry-num | list]
    AKICK channel VIEW [mask | entry-num | list]
    AKICK channel ENFORCE
    AKICK channel CLEAR

    Maintains the AutoKick list for a channel. If a user
    on the AutoKick list attempts to join the channel,
    ChanServ will ban that user from the channel, then kick
    the user.

    The AKICK ADD command adds the given nick or usermask
    to the AutoKick list. If a reason is given with
    the command, that reason will be used when the user is
    kicked; if not, the default reason is “You have been
    banned from the channel”.
    When akicking a registered nick the nickserv account
    will be added to the akick list instead of the mask.
    All users within that nickgroup will then be akicked.

    The AKICK STICK command permanently bans the given mask
    on the channel. If someone tries to remove the ban, ChanServ
    will automatically set it again. You can’t use it for
    registered nicks.

    The AKICK UNSTICK command cancels the effect of the
    AKICK STICK command, so you’ll be able to unset the
    ban again on the channel.

    The AKICK DEL command removes the given nick or mask
    from the AutoKick list. It does not, however, remove any
    bans placed by an AutoKick; those must be removed
    manually.

    The AKICK LIST command displays the AutoKick list, or
    optionally only those AutoKick entries which match the
    given mask.

    The AKICK VIEW command is a more verbose version of
    AKICK LIST command.

    The AKICK ENFORCE command causes ChanServ to enforce the
    current AKICK list by removing those users who match an
    AKICK mask.

    The AKICK CLEAR command clears all entries of the
    akick list.

  • LEVELS

    Syntax: /msg ChanServ LEVELS channel SET type level
    LEVELS channel {DIS | DISABLE} type
    LEVELS channel LIST
    LEVELS channel RESET

    The LEVELS command allows fine control over the meaning of
    the numeric access levels used for channels. With this
    command, you can define the access level required for most
    of ChanServ’s functions. (The SET FOUNDER and SET PASSWORD
    commands, as well as this command, are always restricted to
    the channel founder.)

    LEVELS SET allows the access level for a function or group of
    functions to be changed. LEVELS DISABLE (or DIS for short)
    disables an automatic feature or disallows access to a
    function by anyone other than the channel founder.
    LEVELS LIST shows the current levels for each function or
    group of functions. LEVELS RESET resets the levels to the
    default levels of a newly-created channel (see
    HELP ACCESS LEVELS).

    For a list of the features and functions whose levels can be
    set, see HELP LEVELS DESC.

  • INFO

    Syntax: /msg ChanServ INFO channel [ALL]

    Lists information about the named registered channel,
    including its founder, time of registration, last time
    used, description, and mode lock, if any. If ALL is
    specified, the entry message and successor will also
    be displayed.

    By default, the ALL option is limited to those with
    founder access on the channel.

  • LIST

    Syntax: /msg ChanServ LIST pattern

    Lists all registered channels matching the given pattern.
    (Channels with the PRIVATE option set are not listed.)
    Note that a preceding ‘#’ specifies a range, channel names
    are to be written without ‘#’.

  • OP

    Syntax: /msg ChanServ OP [#channel [nick]]

    Ops a selected nick on a channel. If nick is not given,
    it will op you. If channel and nick are not given,
    it will op you on all channels you’re on, provided you
    have the rights to.

    By default, limited to AOPs or those with level 5 access
    and above on the channel.

  • DEOP

    Syntax: /msg ChanServ DEOP [#channel [nick]]

    Deops a selected nick on a channel. If nick is not given,
    it will deop you. If channel and nick are not given,
    it will deop you on all channels you’re on, provided you
    have the rights to.

    By default, limited to AOPs or those with level 5 access
    and above on the channel.

  • VOICE

    Syntax: /msg ChanServ VOICE [#channel [nick]]

    Voices a selected nick on a channel. If nick is not given,
    it will voice you. If channel and nick are not given,
    it will voice you on all channels you’re on, provided you
    have the rights to.

    By default, limited to AOPs or those with level 5 access
    and above on the channel, or to VOPs or those with level 3
    and above for self voicing.

  • DEVOICE

    Syntax: /msg ChanServ DEVOICE [#channel [nick]]

    Devoices a selected nick on a channel. If nick is not given,
    it will devoice you. If channel and nick are not given,
    it will devoice you on all channels you’re on, provided you
    have the rights to.

    By default, limited to AOPs or those with level 5 access
    and above on the channel, or to VOPs or those with level 3
    and above for self devoicing.

  • HALFOP

    Syntax: /msg ChanServ HALFOP [#channel [nick]]

    Halfops a selected nick on a channel. If nick is not given,
    it will halfop you. If channel and nick are not given,
    it will halfop you on all channels you’re on, provided you
    have the rights to.

    By default, limited to AOPs and those with level 5 access
    and above on the channel, or to HOPs or those with level 4
    and above for self halfopping.

  • DEHALFOP

    Syntax: /msg ChanServ DEHALFOP [#channel [nick]]

    Dehalfops a selected nick on a channel. If nick is not given,
    it will dehalfop you. If channel and nick are not given,
    it will dehalfop you on all channels you’re on, provided you
    have the rights to.

    By default, limited to AOPs and those with level 5 access
    and above on the channel, or to HOPs or those with level 4
    and above for self dehalfopping.

  • PROTECT

    Syntax: /msg ChanServ PROTECT [#channel [nick]]

    Protects a selected nick on a channel. If nick is not given,
    it will protect you. If channel and nick are not given,
    it will protect you on all channels you’re on, provided you
    have the rights to.

    By default, limited to the founder, or to SOPs or those with
    level 10 and above on the channel for self protecting.

  • DEPROTECT

    Syntax: /msg ChanServ DEPROTECT [#channel [nick]]

    Deprotects a selected nick on a channel. If nick is not given,
    it will deprotect you. If channel and nick are not given,
    it will deprotect you on all channels you’re on, provided you
    have the rights to.

    By default, limited to the founder, or to SOPs or those with
    level 10 and above on the channel for self deprotecting.

  • OWNER

    Syntax: /msg ChanServ OWNER [#channel]

    Gives you owner status on channel. If channel is not
    given, it will give you owner status on all channels you’re
    on, provided you have the rights to.

    Limited to those with founder access on the channel.

  • DEOWNER

    Syntax: /msg ChanServ DEOWNER [#channel]

    Removes your owner status on channel. If channel is
    not given, it will remove your owner status on all channels
    you’re on, provided you have the rights to.

    Limited to those with founder access on the channel.

  • INVITE

    Syntax: /msg ChanServ INVITE channel

    Tells ChanServ to invite you into the given channel.

    By default, limited to AOPs or those with level 5 and above
    on the channel.

  • UNBAN

    Syntax: /msg ChanServ UNBAN channel

    Tells ChanServ to remove all bans preventing you from
    entering the given channel.

    By default, limited to AOPs or those with level 5 and above
    on the channel.

  • KICK

    Syntax: /msg ChanServ KICK [#channel [nick [reason]]]

    Kicks a selected nick on a channel. If nick is not given,
    it will kick you. If channel and nick are not given,
    it will kick you on all channels you’re on, provided you
    have the rights to.

    By default, limited to AOPs or those with level 5 access
    and above on the channel.

  • BAN

    Syntax: /msg ChanServ BAN [#channel [nick [reason]]]

    Bans a selected nick on a channel. If nick is not given,
    it will ban you. If channel and nick are not given,
    it will ban you on all channels you’re on, provided you
    have the rights to.

    By default, limited to AOPs or those with level 5 access
    and above on the channel.

  • TOPIC

    Syntax: /msg ChanServ TOPIC channel [topic]

    Causes ChanServ to set the channel topic to the one
    specified. If topic is not given, then an empty topic
    is set. This command is most useful in conjunction
    with SET TOPICLOCK. See /msg ChanServ HELP SET TOPICLOCK
    for more information.

    By default, limited to those with founder access on the
    channel.

  • CLEAR

    Syntax: /msg ChanServ CLEAR channel what

    Tells ChanServ to clear certain settings on a channel. what
    can be any of the following:

    MODES Resets all modes on the channel (i.e. clears
    modes i,k,l,m,n,p,s,t).
    BANS Clears all bans on the channel.
    EXCEPTS Clears all excepts on the channel.
    INVITES Clears all invites on the channel.
    OPS Removes channel-operator status (mode +o) from
    all channel operators.
    HOPS Removes channel-halfoperator status (mode +h) from
    all channel halfoperators, if supported.
    VOICES Removes “voice” status (mode +v) from anyone
    with that mode set.
    USERS Removes (kicks) all users from the channel.

    By default, limited to those with founder access on the
    channel.

  • GETKEY

    Syntax: /msg ChanServ GETKEY channel

    Returns the key of the given channel. This is a command
    mainly intended to be used by bots and/or scripts, so
    the output is in the following way:

    KEY <channel> <key>

    key is “NO KEY” if no key is set.

  • SENDPASS

    Syntax: /msg ChanServ SENDPASS channel

    Send the password of the given channel to the e-mail address
    set in the founder’s nickname record. This command is really
    useful to deal with lost passwords.

    May be limited to IRC operators on certain networks.

    This command is unavailable because encryption is enabled.

  • Go to Top